Friday, October 21, 2011

Running Red Lights on Your Bicycle

Compliance at this signal is easy because the cycle length is very short.
UPDATED: October 28, 2011 - I had a similar experience (see video below from Joseph Rose) with a person on a bike this week as I was riding down SW Broadway southbound from the City Maintenance Shop to the Portland Building. The signal in question follows most of the signal timing principles in the Dutch CROW Manual (traffic is progressed slowly on the street, the cycle length is short, etc). Yet, the person in front of me decided to start about four seconds before the green expired on the side street. I can appreciate the argument that when the traffic signal makes me wait for more than a minute than it either

  • a) isn't detecting me, or 
  • b) isn't meant or designed for me and the person chooses to run the red. 

I can accept poor compliance where either of these cases are the norm. I didn't always obey signals before I became the manager of the traffic signals in Portland. Yet when we're making the signals work for bikes and the signals are changing so promptly... as an experienced cyclist, hopefully you are aware of this, and if you know it doesn't cost you much time to comply with the signal, please do. It's a good opportunity to move acceptance in the public forward, making it look like something any normal law abiding citizen would. do.

The blog post by Joseph Rose has a number of interesting comments and BikePortland posted about it too.

The problem with poor compliance is that I believe it may hold acceptance of bike infrastructure back in terms of acceptance at the national level. If I measure a bicycle compliance rate significantly lower than a motor vehicle, will that result in less acceptance by transportation engineers. I can sympathize with Mia Birk's perspective on stop signs, but I don't feel as comfortable with the same concept with traffic signals. It could be something I am too close to, but having worked with the Police surrounding safety and enforcement issues, it seems like improving compliance would lead to greater legitimacy throughout the community.


ORIGINAL POST: I am going to need some time to think about this before I write anything about it.

Thursday, October 20, 2011

Meaning of the Flashing Don't Walk at Traffic Signals - Pedestrian Countdown Timer Model Ordinance from Salt Lake City


What does it mean? It's all French to me. 

At the Workshop on Pedestrian Safety at Midblock Crossings I learned about the following ordinance of Salt Lake City, which was an idea I had that I think represents a better representation of what the Flashing Don't Walk means with the Countdown timers. 
Here's the complete section from their Code.
SECTION 20.  That Section 12.32.050, Salt Lake City Code, pertaining to pedestrian “walk” and “don’t walk” signals be, and the same hereby is, repealed.
            SECTION 21.  That Section 12.32.055, pertaining to pedestrian signal indications, be, and is hereby enacted to read as follows:
12.32.055 Pedestrian Signal Indications.
Whenever a pedestrian signal is in place and operating, the illuminated words or symbols shall indicate and govern pedestrians as follows:
A.            A steady white WALK or WALKING PERSON (symbolizing WALK) signal indication means that, exercising due caution, a pedestrian facing the signal indication may start to cross the roadway in the direction of the signal indication.
B.            A flashing orange DONT WALK or UPRAISED HAND (symbolizing DONT WALK) signal indication means that a pedestrian shall not start to cross the roadway in the direction of the signal indication, but that any pedestrian who has already started to cross on a steady white WALK or WALKING PERSON (symbolizing WALK) signal indication may complete crossing the roadway.
C.            A steady orange DONT WALK or UPRAISED HAND (symbolizing DONT WALK) signal indication means that a pedestrian shall not enter the roadway in the direction of the signal indication.
                D.  A COUNTDOWN CLOCK (displaying time in seconds remaining in the pedestrian crossing phase) in conjunction with the flashing orange UPRAISED HAND means that a pedestrian facing the signal indication may start to cross the roadway in the direction of the signal indication, but only if such pedestrian is able to safely walk completely across the street or to a safety island before the COUNTDOWN CLOCK shows no remaining time.
Today, I am in suburban Washington DC at the Turner Fairbank Highway Research Center discussing Countermeasures at Urban and Suburban Midblock Crossing Locations. The primary focus of this research is to determine the location of Rapid Flash Beacons and other such devices to improve pedestrian safety. It is a national panel of nearly 25 people discussing opportunities to improve public safety and focus on these measures. The panel includes FHWA researchers, agency practitioners, and even public health advocates, so it is an interesting cross section and I look forward to bringing information back to the City on this.

This sort of treatment at intersections  has reduced crashes in the past ten years


At SE 80th & Foster Road we added a Rapid Flash Beacon, this is the sort of research that's being studied by FHWA's Research Team. 


Wednesday, October 19, 2011

Pedestrian Scramble aka Barnes Dance

The posting of transportation videos on YouTube is something that will make future engineers more innovative. Here's a great summary from DDOT and Wasim Raja, a colleague that I worked with (when he was with Arlington County, VA) in my previous endeavors.


This reminded me of the scramble I saw in Tokyo at the Shibuya District.

Transportation Research Board Paper Acceptance

Sirisha Kothuri, one of the City of Portland's interns over the summer wrote up a paper describing our work to use existing signal controllers to measure delay at traffic signalized intersections. While we were at it we figured out we could collect bicycle counts as well at select locations. Well, I am proud to announce that the paper: "Preliminary Development of Methods to Automatically Gather Bicycle Counts and Pedestrian Delay at Signalized Intersections" was accepted for the 2012 Transportation Research Board Annual Meeting. The authors include Sirisha Kothuri, Titus Reyonlds, Christopher Monsere, and Peter Koonce.

I am sure it will be posted at some point and I will update the post when I find it.

Tuesday, October 18, 2011

Pas Pa Blinde Vinkler: Watch the Blind Spot

Looking for a few examples of a Watch the Blind Spot Caution sign and came across the following on the Google machine today.....

Danish Description with nice graphic
http://www.trygtransport.dk/Default.aspx?MenuID=189
Anti-Dooring Campaign
http://www.keirinberlin.de/?p=469
Campaign for Blind Spot awareness.
http://www.treehugger.com/files/2010/08/no-excuses-for-truck-blind-spots.php

12th Avenue Overcrossing on Mayor's Blog

By taking the time to understand the situation on the ground, the project team crafted a proposal that balances a variety of functional demands and results in an all-around improved situation for trucks, autos, bicyclists, and pedestrians.
Mayor Adams weighed in on the project, saying, “This is the type of project I expect to see more of in Portland. We identified areas that needed improvement, tested the proposed changes, used fact-based analyses to make improvements, and came up with a solution that works better for trucks, helps out two important manufacturing companies in the city, and makes the street safer for bicyclists and pedestrians going to school.”